Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Bloomington, CA
Chimney repair in Bloomington usually comes down to one thing: older homes with masonry fireplaces that haven’t been looked at in years. We’re Pilgrim Chimney, and since 2014 we’ve worked on mid-century ranches and tract homes across ZIP 92316 where clay-tile flues are cracked, crowns are spalling, and caps have gone missing. Bloomington’s hot, dry summers and Santa Ana winds put real stress on brick and mortar, and the short winter heating season means problems surface fast when the first fire gets lit. Call (866) 253-5031 and we’ll take a look.
Why Bloomington Homes Are Different
Most Bloomington homes were built between the 1940s and 1970s, and a lot of them still have their original masonry fireplaces. That means we’re typically working with clay-tile flue liners that have been through fifty or sixty heating seasons, not modern stainless systems. The inland climate does the rest. Bloomington summers run hot and bone-dry, which bakes chimney crowns and causes hairline cracks in mortar joints. Then come the Santa Ana winds, pushing leaves, dust, and debris into uncapped flues and drying out any remaining moisture. When the first cold snap arrives in late fall, homeowners light fires that have not burned in months, and that is exactly when creosote buildup and hidden flue damage become a fire risk.
There’s another Bloomington-specific habit we see regularly. Plenty of residents burn scrap wood, pallet wood, and yard trimmings in older fireplaces. It’s cheap and it’s what people have always done here. The problem is that unseasoned scrap produces heavy, sticky creosote far faster than seasoned cordwood, and it clogs flues on aging brick chimneys quickly. We plan our sweeps accordingly, and we always check the full system while we’re there.
Styles & brands we work with
Our Main Bloomington Services
Bloomington homeowners call Pilgrim Chimney most often for two jobs: sweeping the chimney before winter and clearing the dryer vent before it becomes a problem. Both are fire-safety work, and both are jobs we handle start to finish.
Chimney Sweep in Bloomington
A proper sweep in Bloomington is about more than running a brush up the flue. We remove creosote and soot from the firebox, smoke shelf, damper, and flue, then check the liner, crown, and cap for damage as part of the same visit. The scrap-wood burning common in this area means we often find heavier glazed creosote than you’d see in newer suburban neighborhoods, so we adjust our tools and process accordingly. If the sweep uncovers cracked tiles or a damaged cap, we can quote the repair right then instead of referring you somewhere else. Learn more about Chimney Sweep in Bloomington.
Dryer Vent Cleaning in Bloomington
Lint-clogged dryer vents are one of the leading causes of residential fires, and older Bloomington homes often have long, twisting vent runs that trap lint faster than modern layouts. We clean the full run from dryer to exterior termination, removing built-up lint and any bird or rodent nesting, then verify airflow before we leave. Bloomington’s dry, dusty air adds fine particulates to the lint load, so vents here tend to need attention more often than homeowners expect. For the full picture, see Dryer Vent Cleaning in Bloomington.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Bloomington
Chimney repair in Bloomington is driven by age and weather. The original clay-tile liners in 1950s and 1960s ranch homes crack under decades of heating cycles, and Bloomington’s dry summers accelerate crown and mortar deterioration. When those cracks let heat reach the brick or framing around the chimney, you have a genuine fire risk. Pilgrim Chimney’s repair crew handles everything from minor crown patching to full flue resurfacing, so you’re not left with a diagnosis and a referral to someone else. Read more about our repair work at Chimney Repair.
Chimney Cap Installation
Signs you need it
No cap, a rusted-out cap, or debris and birds entering the flue from the top.
What it costs in Bloomington
Chimney cap installation in Bloomington typically runs $200 to $600 depending on flue size and cap material.
How we do it
We measure the flue, select a stainless or copper cap sized correctly, secure it to the crown, and verify the spark arrestor mesh is seated properly.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, damp brick after rain, or visible gaps where the flashing meets the roofline.
What it costs in Bloomington
Flashing repair in Bloomington generally falls between $300 and $750 depending on access and how much flashing needs replacement.
How we do it
We remove the damaged flashing, install new step and counter flashing with proper overlap, seal the joints, and test for a watertight fit.
Chimney Crown Repair
Signs you need it
Cracks in the concrete or mortar crown, flaking surface material, or water pooling on top of the chimney.
What it costs in Bloomington
Crown repair in Bloomington typically ranges from $400 to $900 based on crown size and the extent of deterioration.
How we do it
We clean out damaged material, rebuild or resurface the crown with proper slope away from the flue, and seal it against water penetration.
What Chimney Repair Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Chimney cap installation | $200 – $600 |
| Chimney flashing repair | $300 – $750 |
| Chimney crown repair | $400 – $900 |
Can a cracked flue liner in Bloomington wait until next season?
No. A cracked clay-tile liner exposes the surrounding brick and framing to heat with every fire, and Bloomington’s dry conditions make ignition more likely. If we find a cracked liner during a sweep, we’ll show you the camera footage and walk through your repair options the same day.
Why do Bloomington chimneys need caps so often?
Santa Ana winds push debris, leaves, and sometimes birds into uncapped flues, and that debris traps moisture and blocks airflow. A missing or rusted cap is one of the most common problems we find in Bloomington, and it’s an inexpensive fix compared to what water and debris damage can cost later.
Brands We Service in Bloomington
We install and service professional-grade chimney components in Bloomington homes using materials like DuraFlex liner systems, HeatShield resurfacing, Gelco caps, and Copperfield flashing. These are trade products sourced from industry distributors, not hardware-store patch kits. We keep common components on hand for Bloomington jobs, which keeps turnaround tight during the pre-winter push. See our brands for detail.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney cap installation | $200 – $600 |
| Chimney flashing repair | $300 – $750 |
| Chimney crown repair | $400 – $900 |
| Dryer vent cleaning | $150 – $300 |
In Bloomington, the main things that push price higher are heavy creosote glaze from scrap-wood burning, debris soaked into old mortar joints, and flue liners that need more than a quick sweep. We quote the job before we start, and you’ll know the full price before any tool touches your chimney.
Neighborhoods We Serve in Bloomington
We work throughout Bloomington and the surrounding ZIP 92316 area, from older ranch homes off Valley Boulevard to the tract neighborhoods east of Cedar Avenue. Our service area covers the full city and nearby unincorporated pockets, with most appointments available within a few days during sweep season.
- Central Bloomington
- Valley Boulevard corridor
- East Bloomington
- Cedar Avenue area
- Unincorporated San Bernardino County parcels near Bloomington
Service Area – Cities Near Bloomington
Pilgrim Chimney serves Bloomington and the surrounding Inland Empire communities. We regularly work in Fontana, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA. If you’re nearby and need a chimney sweep, repair, or dryer vent cleaning, call (866) 253-5031 to check availability in your area.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Bloomington
Most routine sweeps, cap installations, and crown repairs do not require a permit in Bloomington. Larger structural work like full liner replacement may fall under San Bernardino County building requirements, and we’ll tell you if that applies to your job before any work begins.
During the pre-winter push, most Bloomington appointments are scheduled within a few days. Spring and summer are slower, and that’s actually a smart time to schedule repairs so your fireplace is ready before the first cold night. Call (866) 253-5031 and we’ll find a slot that works.
We cover Bloomington and all surrounding communities including Fontana, Rialto, Glen Avon, and Pedley. If you’re in ZIP 92316 or just outside it, chances are we’re already working nearby. Call and we’ll confirm your address is in our service area.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Beatriz Castillo"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Angela Park"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Daniela Martinez