Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fontana, CA
Chimney repair in Fontana usually means one of three things: a cracked crown from years of Inland Empire sun, a rusted-out cap that let birds or roof rats inside, or a flashing seam that Santa Ana winds finally pried open. Pilgrim Chimney has served Fontana since 2014, and we handle all of it, from the first camera inspection to the finished mortar work. Most Fontana homes were built between the 1950s and 1990s, and the fireplaces in them have spent more years idle than burning. That changes what goes wrong. Call (866) 253-5031 when you’re ready to find out what’s actually happening in your flue.
Why Fontana Homes Are Different
Fontana’s housing stock is overwhelmingly postwar tract construction. Older Fontana, the 92335 side, runs heavy on 1950s and 60s ranch and block homes. South Fontana, 92336 and 92337, tilts toward 1980s and 2000s tile-roof subdivisions that back up against the foothills and open wash. Nearly all of them came with builder-installed masonry or prefab fireplaces. The flues have sat idle for years in most cases, because inland heat makes a wood fire the last thing anyone wants in July.
That idle time is the problem. Creosote hardens into a glaze that a standard brush won’t take off. Rain and Santa Ana winds work on aging caps until they crack or blow clean off. And once the cap’s gone, the flue becomes an open invitation. Birds, squirrels, and roof rats move in. South Fontana especially, where tile roofs meet the wash, we pull palm frond debris and roof-rat nesting out of flues on a regular basis. The fireplace was decorative for the previous owner, and nobody noticed the cap was missing until the scratching started.
Drought plays a role too. Dry years shrink the soil, which settles foundations, which shifts masonry chimneys just enough to crack crowns and open flashing seams. None of this is dramatic. It’s slow, steady, and common in Fontana.
Styles & brands we work with
Our Main Fontana Services
Fontana homeowners call us about two things most often: getting a flue cleaned and getting a dryer vent cleared. Both are fire-safety work, and both are jobs we handle start to finish.
Chimney Sweep in Fontana
A chimney sweep in Fontana is rarely about a season of heavy burning. More often, it’s about removing what moved in while the fireplace sat unused. Birds, squirrels, roof rats, palm fronds, eucalyptus litter, and hardened creosote from years past. We run a camera through the flue so you see what we see, then sweep to the smoke shelf and check the cap, crown, and flashing before we leave. One call handles the inspection and the cleaning. Chimney Sweep in Fontana
Dryer Vent Cleaning in Fontana
Dryer vents in Fontana clog with the same lint as anywhere else, but the homes here often have longer vent runs through attics and out tile roofs, which gives lint more places to collect. The leading cause of residential dryer fires is a clogged vent. We clean the full run from dryer to exterior cap, check the termination for blockages, and tell you plainly whether the venting is safe to keep using. Dryer Vent Cleaning in Fontana
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Fontana
Chimney repair in Fontana starts with a camera inspection, because the most common problems here happen where nobody looks: the crown, the cap, the flashing, and the inside of the flue. Tile-roof tract homes in south Fontana and older ranch homes across 92335 both age the same way. Sun cracks the crown, wind and rain get inside, and rust does the rest. HeatShield resurfacing and DuraFlex liner work are both on our truck list, not referral list. That’s the difference between a Chimney Repair company and a sweep company that hands you a phone number when they find damage.
Chimney Cap Installation
Signs you need it
You hear scratching in the fireplace, smell something nesting in the flue, or can see from the ground that the cap is missing, rusted, or sitting crooked.
What it costs in Fontana
A new cap installation in Fontana typically runs between $240 and $410 depending on flue size and roof access, including the cap itself and stainless hardware.
How we do it
We measure the flue, install a stainless or copper cap sized to your flue opening with mechanical fasteners (never adhesive alone), and confirm the spark arrestor mesh is seated so birds and rats stay out.
Chimney Liner Installation
Signs you need it
Your flue tiles are cracked, spalling, or missing, and your last Level 2 inspection or camera scan showed gaps where heat and gases can reach the framing around the chimney.
What it costs in Fontana
A full liner installation in Fontana most often runs between $1,975 and $3,400 depending on flue size, height, and roof access.
How we do it
We run a camera to document the damage, size the system to your appliance and flue dimensions, then install a DuraFlex or Copperfield liner with proper termination and an insulation blanket where the design calls for it.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, dampness inside the firebox after rain, or rusted metal and cracked caulk at the roof line.
What it costs in Fontana
Flashing repair in Fontana usually falls between $350 and $850, depending on roof pitch, chimney location, and how much of the old step flashing and counter-flashing has to be replaced.
How we do it
We pull the damaged flashing, replace step and counter-flashing with new metal cut to fit your roof and chimney, seal the seam with professional-grade sealant, and water-test the repair before we pack up.
Chimney Crown Repair
Signs you need it
The mortar crown on top of the chimney is cracked, spalling, or pulling away from the flue liners, letting rain soak into the masonry below it and up near the roof line.
What it costs in Fontana
Crown repair here typically runs $500 to $1,200, with full crown rebuild or pour near the top of that range when the existing concrete is too far gone to patch.
How we do it
We prep the surface, fill cracks with a flexible sealant that moves with the weather, and recoat with a breathable waterproof crown compound so water rolls off instead of soaking through.
What Chimney Repair Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Chimney cap installation | $240 – $410 |
| Chimney flashing repair | $350 – $850 |
| Chimney crown repair | $500 – $1,200 |
| Chimney liner installation | $1,975 – $3,400 |
Do I really need a new liner, or can it wait?
If your camera scan shows cracked or missing flue tiles, the answer is no, it can’t wait, because gaps in the flue let heat and carbon monoxide reach combustible framing. In Fontana homes where the fireplace sits unused most of the year, a crack can still worsen with every rain and heat cycle. Call (866) 253-5031 for an honest read and camera footage you can see for yourself.
Will the Santa Ana winds make my chimney problem worse?
Yes. Santa Ana winds push loose caps around, drive rain sideways into flashing seams, and drop more palm fronds and eucalyptus litter onto your roof and cap. A cap that’s already loose or flashing that’s already pulling away will take on water faster when the wind pushes moisture where gravity never would. We can assess exactly that before the next wind season.
Brands We Service in Fontana
Our repair work in Fontana uses professional-trade materials, not hardware-store patch kits. We install and service DuraFlex liner systems, HeatShield resurfacing, Copperfield caps, and Gelco components, sourced from industry distributors and stocked for common Fontana flue sizes so we’re not waiting on a part when your chimney is open. Our brands carry full manufacturer warranties, and we stand behind the install.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Chimney sweep (Level 1) | $180 – $340 |
| Chimney sweep (Level 2) | $350 – $550 |
| Chimney cap installation | $240 – $410 |
| Chimney cap replacement | $240 – $410 |
| Chimney crown repair | $500 – $1,200 |
| Chimney flashing repair | $350 – $850 |
| Chimney liner installation | $1,975 – $3,400 |
| Dryer vent cleaning | $150 – $250 |
Roof pitch and access push Fontana pricing up most, especially on tile roofs over two-story south Fontana homes where setup takes longer. You’ll get a flat price before work starts, and that number doesn’t change unless we find something hidden and you approve the change in writing first.
Neighborhoods We Serve in Fontana
Our trucks work across all four Fontana ZIP codes, 92335, 92336, 92337, and 92331. We’re in older Fontana ranch-and-block neighborhoods as often as the tile-roof subdivisions south of the 210.
- Downtown Fontana and Mango neighborhood (92335)
- Fontana Village and Jurupa Hills area (92335)
- South Ridge and open wash neighborhoods (92336)
- Walnut Village and Herrera areas (92337)
- North township and foothill edge near Janet Lane (92331)
Most Fontana neighborhoods we can schedule within a week, and our Victorville dispatch keeps us routing through the area regularly enough that a south Fontana visit doesn’t cost you a travel premium.
Service Area – Cities Near Fontana
Fontana sits at the center of a cluster of Inland Empire communities that share the same postwar housing stock and the same dry-heat chimney conditions. We regularly serve Bloomington, CA just southeast, Rialto, CA to the northeast, Glen Avon, CA nearby, and Pedley, CA just across the wash and down toward the 60. If you’re anywhere in this stretch, we’re already routing through your area.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fontana
Most repairs, caps, liners, flashing, and crowns, don’t require a city permit in Fontana because they’re classified as maintenance or like-for-like replacement. If you’re changing the appliance inside the firebox or altering the structure, that’s a different conversation. We’ll tell you before we touch anything, and we won’t guess. Call (866) 253-5031 and ask us directly.
We route from Victorville and schedule Fontana jobs in clusters, so most repairs start within five to ten business days depending on the work. Sweeps and dryer vents are quicker. If you have an active leak or an animal in the flue, say so when you call and we’ll work you in sooner. Call (866) 253-5031 to check current scheduling.
We work with the specific rules your HOA has, but we don’t manage HOA approval for you. Most Fontana HOAs don’t restrict chimney caps or crown work as long as the cap profile matches the original. If you have a tile roof and a visible cap, we’ll send you photos and measurements so you can show the board exactly what’s going on. Call (866) 253-5031 and we’ll walk you through it.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Beatriz Castillo"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Angela Park"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Daniela Martinez